«
»

emitSMS plugin update

The emitSMS plugin has been updated with a small new feature – it will now strip out dashes and spaces from your phone numbers in Address Book before sending them to the phone, as most phones don’t seem to accept numbers in this format. Grab the new version here.

Tags: , ,

This entry was posted on Saturday, January 16th, 2010 at 3:10 pm and is filed under development, mac. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

9 Responses to “emitSMS plugin update”

  1. Antonio says:
    January 16, 2010 at 5:16 pm

    Great! Thanks.

    Reply
  2. Daniel says:
    January 16, 2010 at 7:59 pm

    It works, thank you very much!

    Reply
  3. Fred says:
    February 7, 2010 at 3:15 pm

    Hi, thank you for the great job.
    Quesiton, is there a place where the plugin save the messages sent, or a log, or something to keep a track of theses messages ?

    Thank you

    Reply
  4. tobias says:
    April 12, 2010 at 9:02 am

    hi –

    i can’t get this to work. I have installed your latest update and am getting a “+ cms error 38″ message on send. I tried with two SE phones, W810i and W850i. Fyi, I use standard ITU phone number formatting in address book, as +cc (ac) nnnnnnn (where cc is country code, ac is area code and n is number). This works perfectly with the emitsms widget v1.99, so I wonder why it doesn’t with your plugin…?

    Can you help? Best regards
    tobias

    Reply
    • sigmaris says:
      April 20, 2010 at 7:35 pm

      Please try the latest version (2.3) as it now strips out parentheses as well as dashes from the number before sending.

      Reply
  5. Gabriel says:
    May 17, 2010 at 3:52 pm

    Hei,
    thanks a lot for your great work!!
    I’ve a question. I’m searching for a way to receive SMS via Bluetooth (maybe notification via growl?!) on my mac.
    Do you know a way to solve this?
    Many thanks for help!

    Reply
    • sigmaris says:
      May 17, 2010 at 4:23 pm

      Hi,
      This plugin connects to the phone briefly to send a SMS, then disconnects. To receive SMS on a Mac via Bluetooth would be more complex; the Mac would need to establish a persistent connection to the phone and set the phone to inform it of any arriving SMS, then process messages sent back from the phone over the Bluetooth connection. I know of a program, BluePhone Elite, which is capable of doing this and a lot more, but I don’t know of any freeware software that will do it. Hope this helps.

      Reply
  6. Johannes says:
    June 19, 2010 at 9:38 am

    Hi,

    installed the plugin and it can send the first sms without problems. But it doesnt close the connection to the phone so the next sms wont send. It just keeps on saying sending…

    I’m using the plugin with a Nokia 6131

    Reply

Leave a Reply